Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Chevrolet Sail
  6. : Gearshift gaiter

Chevrolet Sail - Gearshift gaiter

Chevrolet Sail (2014-2023 / MK 3)
How to replace the gear shift boot in a Chevrolet Sail?

Using a flat object, we will release the plastic surrounding the gear shift, lift it up and remove the connectors. We grab the gear shift knob and pull it …read all…
Posted on 11 June 2023 by ScegliAuto
Chevrolet Sail (2014-2023 / MK 3)
How do you replace the Chevrolet Sail gear gaiter?

To be able to replace the gearbox gaiter on the Chevrolet Sail you need to pry with an object at the base of the gaiter itself, in order to release the pins …read all…
Posted on 4 June 2023 by ScegliAuto

Car stereo (3) Battery (1) Key (1) Dashboard (1) Gearshift gaiter (2) Cabin air filter (4) Hand brake (1) Headlight bulb (2) Antifreeze liquid (1) Gear oil (1) Door panel (1) Brake pads (2) Pump (2) Radiator (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos