Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Sail
    4. : How do you replace the Chevrolet Sail gear gaiter?

Chevrolet Sail - Video tutorial

Model: Chevrolet Sail MK 3 - Years 2014-2023
Part: Gearshift gaiter
Operation: How do you replace the Chevrolet Sail gear gaiter?

To be able to replace the gearbox gaiter on the Chevrolet Sail you need to pry with an object at the base of the gaiter itself, in order to release the pins that are in this position. Once the fixing clips at the base of the boot have been released, it will be possible to lift the boot itself so that it is completely removed from the gear lever. Then, it will be possible to go and insert the new one, fixing it correctly to the knob; finally it will be necessary to hook the clips located at the base of its housing, checking that the headset is firmly in place.


Posted on 4 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos