Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Chevrolet Sail?

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antifreeze coolant

See other generations:
Video tutorial

To replace the coolant in a Chevrolet Sail, open the hood to access the components inside the engine compartment. At the back of the radiator, you will find the hose shown in the video, which needs to be disconnected by loosening its clamp.

Once the hose is disconnected, collect the fluid in a properly positioned container. After the fluid has completely drained, reconnect the hose and refill through the vent at the top of the reservoir in the engine compartment.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timin…
How to Replace the Shift Boot on a Chevrolet Sail?
How to Replace the Shift Boot on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the shift boot on a Chevrolet Sail, pry at the base of the boot with a tool to release the clips located there. Once the retaining clips a…
How to Replace the Battery of the Chevrolet Sail?
How to Replace the Battery of the Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the battery of the Chevrolet Sail, open the hood to access the components inside the engine compartment: the battery is located on the rig…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos