Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Chevrolet Sail?

Model: Chevrolet Sail MK 3 - Years 2014-2023
Part: Pump

To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timing belt, move it aside and loosen the pulley corresponding to the water pump. This will allow you to remove the pump from its position and replace it with a new part; after the replacement, reattach the pulley and reinstall the timing belt you removed earlier.

Updated on 6 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Water Pump on a Chevrolet Sail 1.3
How to Replace the Water Pump on a Chevrolet Sail 1.3
Chevrolet Sail (2010-2017 / MK 2) In today's tutorial video, you will see the main instructions on how to disassemble and replace the water pump on a Chevrolet Sail. First, open the h…
How to Clean the Radiator on the Chevrolet Sail
How to Clean the Radiator on the Chevrolet Sail
Chevrolet Sail (2014-2023 / MK 3) In this video, you will learn how to clean the radiator on the Chevrolet Sail. Start by removing the front bumper to access the front area and reach …
Where is the fuse box of the Chevrolet Sail located?
Where is the fuse box of the Chevrolet Sail located?
Chevrolet Sail (2010-2017 / MK 2) The Chevrolet Sail features a fuse box inside. The box is located inside the cabin, specifically between the steering column and the driver's door at…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos