Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Sail - Pump

Pump Chevrolet Sail (2014-2023 / mk 3)

Chevrolet Sail (2014-2023 / MK 3)
How to Replace the Water Pump on a Chevrolet Sail?
To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timing belt, …Read all…
Posted on 9 November 2026 by ScegliAuto
Chevrolet Sail (2010-2017 / MK 2)
How to Replace the Water Pump on a Chevrolet Sail 1.3
In today's tutorial video, you will see the main instructions on how to disassemble and replace the water pump on a Chevrolet Sail. First, open the hood of …Read all…
Posted on 15 August 2026 by ScegliAuto

Pump Chevrolet Sail (2010-2017 / mk 2)

Chevrolet Sail (2014-2023 / MK 3)
How to Replace the Water Pump on a Chevrolet Sail?
To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timing belt, …Read all…
Posted on 9 November 2026 by ScegliAuto
Chevrolet Sail (2010-2017 / MK 2)
How to Replace the Water Pump on a Chevrolet Sail 1.3
In today's tutorial video, you will see the main instructions on how to disassemble and replace the water pump on a Chevrolet Sail. First, open the hood of …Read all…
Posted on 15 August 2026 by ScegliAuto
Car stereo (3) Battery (1) Key (2) Checks and maintenance (1) Dashboard (1) Shifter boot (2) Cabin air filter (4) Parking brake (1) Headlight bulb (2) Antifreeze coolant (1) Transmission fluid (1) Door trim panel (1) Brake pads (2) Pump (2) Radiator (1) Fuse box (7)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos