Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Chevrolet Sail 1.3

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Pump

See other generations:
Video tutorial

In today's tutorial video, you will see the main instructions on how to disassemble and replace the water pump on a Chevrolet Sail. First, open the hood of your car and start by removing the air filter box, unscrewing all the mounting screws; then unscrew the engine mount bolts, lifting the engine from below.

At this point, unscrew the timing belt tensioner, then remove the belt itself; unscrew the bolts of the water pump, removing it along with its pulley, and replace it with the new one (using the original part).


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timin…
How to Clean the Radiator on the Chevrolet Sail
How to Clean the Radiator on the Chevrolet Sail
Chevrolet Sail (2014-2023 / MK 3) In this video, you will learn how to clean the radiator on the Chevrolet Sail. Start by removing the front bumper to access the front area and reach …
Where is the fuse box located in the Chevrolet Sail?
Where is the fuse box located in the Chevrolet Sail?
Chevrolet Sail (2010-2017 / MK 2) The Chevrolet Sail has one fuse box inside. The box is located within the cabin, specifically between the steering column and the driver's door at th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos