Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Sail - Car stereo

Chevrolet Sail (2000-2009 / MK 1)
How to install an Android car stereo on a Chevrolet Sail
In this short and simple guide, we will see the instructions that will allow us to disassemble the stock radio and install a new Android-compatible one on the …read all…
Posted on 9 July 2023 by ScegliAuto
Chevrolet Sail (2010-2017 / MK 2)
How to replace the Chevrolet Sail car radio.
Let's take a look in this guide at the instructions on how to disassemble and replace the stock radio of the Chevrolet Sail. First, we get into the car and …read all…
Posted on 13 April 2023 by ScegliAuto
Chevrolet Sail (2010-2017 / MK 2)
How to disassemble the Chevrolet Sail car stereo
If you want to disassemble the stock radio mounted on your Chevrolet Sail, all you have to do is read the following mini guide carefully and put into practice …read all…
Posted on 30 April 2024 by ScegliAuto
Car stereo (3) Battery (1) Key (1) Dashboard (1) Gearshift gaiter (2) Cabin air filter (4) Hand brake (1) Headlight bulb (2) Antifreeze liquid (1) Gear oil (1) Door panel (1) Brake pads (2) Pump (2) Radiator (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos