Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Sail
    4. : How to replace the Chevrolet Sail car radio.

Chevrolet Sail - Video tutorial

Model: Chevrolet Sail MK 2 - Years 2010-2017
Part: Car stereo
Operation: How to replace the Chevrolet Sail car radio.

Let's take a look in this guide at the instructions on how to disassemble and replace the stock radio of the Chevrolet Sail. First, we get into the car and begin to remove the central plastic cover of the dashboard, also removing the air vents. Then we unscrew the radio's mounting screws found on the sides, in order to remove it (disconnecting the electrical wiring located on the back), as shown in the video. At this point, we proceed to install the new radio, modifying (if necessary) the electrical wiring, following the video until the end!


Posted on 13 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos