Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stock Radio from a Chevrolet Sail

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

To remove the stock radio installed in your Chevrolet Sail, carefully read the following mini guide and apply the described steps. Before you start, for your safety, it is advisable to perform this procedure after disconnecting the car battery.

Go inside the vehicle and reach your hand under the air conditioning panel. Gently pull it towards you and remove it. Also, remove the central protective panel (you can use a flathead screwdriver for assistance).

Then, unscrew the screws holding the radio in place, disconnect it from the electrical connector, and pull it towards you.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Chevrolet Sail
How to Replace the Radio in a Chevrolet Sail
Chevrolet Sail (2010-2017 / MK 2) In this guide, find instructions on how to remove and replace the factory radio in a Chevrolet Sail. First, get in the vehicle and start by removing …
How to Install an Android Car Stereo in the Chevrolet Sail
How to Install an Android Car Stereo in the Chevrolet Sail
Chevrolet Sail (2000-2009 / MK 1) In this short and simple guide, you will find instructions to remove the factory radio and install a new Android-compatible unit in the Chevrolet Sai…
How to Clean the Radiator on the Chevrolet Sail
How to Clean the Radiator on the Chevrolet Sail
Chevrolet Sail (2014-2023 / MK 3) In this video, you will learn how to clean the radiator on the Chevrolet Sail. Start by removing the front bumper to access the front area and reach …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos