Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Chevrolet Sail
    4. : Cabin air filter

Chevrolet Sail - Cabin air filter

Chevrolet Sail (2014-2023 / MK 3)
How to replace the cabin filter in the Chevrolet Sail?
In this tutorial we can see how to replace the cabin filter in the Chevrolet Sail, an extremely simple and inexpensive operation. First of all, position …read all…
Posted on 22 April 2023 by ScegliAuto
Chevrolet Sail (2014-2023 / MK 3)
How do you replace the cabin filter on your Chevrolet Sail?
In order to replace the cabin filter on the Chevrolet Sail, you need to go and open the glove box located on the front passenger side, so that you can release …read all…
Posted on 4 May 2023 by ScegliAuto
Chevrolet Sail (2010-2017 / MK 2)
How to replace a cabin filter on Chevrolet Sail
In this video tutorial we can see how it is possible to replace the cabin filter on Chevrolet Sail, following some basic steps: the first thing to do is to buy …read all…
Posted on 30 August 2022 by ScegliAuto
Chevrolet Sail (2014-2023 / MK 3)
How to replace the cabin filter in the Chevrolet Sail?
As we can see in this tutorial, replacing the cabin filter in the Chevrolet Sail is an extremely simple and fast operation. First of all, let's position …read all…
Posted on 13 August 2022 by ScegliAuto
Car stereo (3) Battery (1) Key (1) Dashboard (1) Gearshift gaiter (2) Cabin air filter (4) Hand brake (1) Headlight bulb (2) Antifreeze liquid (1) Gear oil (1) Door panel (1) Brake pads (2) Pump (2) Radiator (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos