Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Chevrolet Sail?

Model: Chevrolet Sail MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter in the Chevrolet Sail, open the glove compartment located on the front passenger side to detach the pins securing it from the inside. Once these pins are removed, lower the glove compartment completely to access the components at its rear.

Here, you will find the air filter box, which needs to be opened, and the filter inside should be removed; this will allow you to insert the new replacement part, close the box, and secure the glove compartment again.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet Sail?
How to Replace the Cabin Air Filter in a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) In this tutorial, you will learn how to replace the cabin air filter in a Chevrolet Sail, a very simple and cost-effective task. First, position your…
How to Replace the Cabin Filter on a Chevrolet Sail
Chevrolet Sail (2010-2017 / MK 2) In this video tutorial, you can see how to replace the cabin filter on a Chevrolet Sail by following some essential steps: the first thing to do is p…
How to Replace the Cabin Air Filter in a Chevrolet Sail?
How to Replace the Cabin Air Filter in a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) As you can see in this tutorial, replacing the cabin air filter in a Chevrolet Sail is an extremely simple and quick task. First, sit in the passenge…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos