Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter in a Chevrolet Malibu

Model: Chevrolet Malibu MK 5 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Fuel filter

See other generations:
Video tutorial

To replace the fuel filter in a Chevrolet Malibu, follow these simple steps: First, buy a new fuel filter from an authorised dealer. Lift the rear of the vehicle with a hydraulic jack and secure it with axle stands.

Wear safety goggles to protect your eyes from any fuel splashes. Use a three-quarter spanner to hold one side, then use a 17 mm spanner to loosen the filter nut and remove the fuel hose.

Once the old fuel filter is removed, replace it with the new one. Before tightening the new filter, apply Teflon tape to the threads to create a proper seal and prevent fuel leaks. Install the new fuel filter.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a 2016 Chevrolet Malibu
How to Replace the Cabin Air Filter in a 2016 Chevrolet Malibu
Chevrolet Malibu (2016-2024 / MK 9) To replace the cabin air filter in your Chevrolet Malibu Mk2 (2016), follow the instructions below carefully. First, access the interior of the car f…
How to Replace the Engine Air Filter of the Chevrolet Malibu
How to Replace the Engine Air Filter of the Chevrolet Malibu
Chevrolet Malibu (2013-2019 / MK 8) To independently replace the cabin air filter in your Chevrolet Malibu (2013-2015), follow these steps. First, go outside the vehicle and open the fr…
Where to Find the Fuse Box in the Chevrolet Malibu
Where to Find the Fuse Box in the Chevrolet Malibu
Chevrolet Malibu (2016-2024 / MK 9) In this guide for Chevrolet Malibu Mk9 owners (2016-2023), discover where the fuse box containing all the various fuses is located. Once you find the…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos