Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel filter of the Chevrolet Spark?

Model: Chevrolet Spark M100, M150 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel filter

See other generations:
Video tutorial

The fuel filter replacement on the Chevrolet Spark can be carried out by loosening the screws that secure it to the corresponding housing: the piece will be located in the lower part of the car, near the right rear wheel and under the tank. Once the filter has been located, the screws holding it in place must be loosened and then the connected pipes can be disconnected for the passage of fuel; the new filter can now be inserted into its seat, connecting it to the appropriate pipes and then securing it with the previously removed screws, checking its operation.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter in a Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) Replacing the fuel filter in a Chevrolet Spark is very simple, but you must take the necessary precautions by raising the car on a jack, as access sp…
How to Replace the Fuel Filter of a Chevrolet Spark?
How to Replace the Fuel Filter of a Chevrolet Spark?
Chevrolet Spark (1998-2016 / M100, M150) To replace the fuel filter of a Chevrolet Spark, loosen the screws securing it to its housing: the part is located at the rear right of the vehicle, …
How to Replace the Cabin Air Filter in a Chevrolet Spark 2
How to Replace the Cabin Air Filter in a Chevrolet Spark 2
Chevrolet Spark (2016-2022 / M400) If it is time to replace the cabin air filter in your Chevrolet Spark Mk2, follow the instructions in this guide to complete the operation without an…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos