Do it yourself
| ||||
|
Chevrolet Spark - Video tutorial
Model: Chevrolet Spark
M300, MK 1
- Years 2009-2016 Replacing the fuel filter in the Chevrolet Spark is very simple, however, precautions must be taken by lifting the car on a jack, as there is very little access space. Once the car has been raised in the part of the right rear wheel, let's go underneath and locate the filter, which is easily recognizable. Unscrew the screw that holds the rubber clamp tightly, extract the filter and disconnect the two pipes by pressing the clips placed on both connectors. If this is difficult, we can get a pliers suitable for the purpose. Then insert the new filter, make sure that the pipes are firmly fixed and fix it to the clamp.
Posted on 22 May 2022 by ScegliAuto
This video is currently unavailable
Other guides that may interest you |
How to reset the TPMS on the Hyundai I20To reset the low tire pressure sensor, proceed as follows: sit in the driver's seat, turn on the ignition. On the steering wheel, among the right side controls, locate the control at the top left next to the "cruise" control. Press the control several times until the tire pressure situation is selected on the display. At this point, get out of the car and restore the correct pressure of the tire with low pressure. Then enter the passenger compartment again and the low tire pressure warning light will be off. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |