Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fuel filter of the Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel filter

Video tutorial

To replace the fuel filter of the Chevrolet Matiz, we lift the car and place safety stands under the chassis. We find the filter under the body at the height of the right rear passenger seat, disconnect the ground contact, place a container under the filter to collect any fuel leaks, and disconnect the inlet and outlet tubes using a small screwdriver.

We bleed the tubes, remove the clamp that tightens the support bracket, and remove the old filter, being careful of any remaining fuel inside. Insert the new filter into the bracket, using the ground contact as a reference for orientation, secure it with a new clamp, and finally reconnect the two tubes and the ground contact.


Posted on 23 May 2025 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Chevrolet Matiz
Replacing the Fuel Pump on the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) This guide shows you how to remove and replace the fuel pump on the second series Chevrolet Matiz. First, access the rear of the vehicle and start by…
Replacing the Fuel Filter on Chevrolet Matiz
Replacing the Fuel Filter on Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Locate the fuel filter underneath the car (if you don't know which it is, watch the video) and unscrew the long, single screw that secures it to the …
How to Change the Fuel Injectors of the Chevrolet Matiz
How to Change the Fuel Injectors of the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) In today's tutorial, you will learn how to remove and replace the fuel injectors of the petrol Chevrolet Matiz. First, open the bonnet and start by r…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos