Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fuel Injectors of the Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel injectors

Video tutorial

In today's tutorial, you will learn how to remove and replace the fuel injectors of the petrol Chevrolet Matiz. First, open the bonnet and start by removing the upper pipes, disconnecting the electrical connector of the sensor; then use a 12 mm spanner to undo the bolt of the rail bracket.

At this point, remove the intake hose and the air filter housing; disconnect the fuel pipe and remove the electrical connectors of the injectors. Finally, remove and replace the injectors with new ones!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Chevrolet Matiz
Replacing the Fuel Pump on the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) This guide shows you how to remove and replace the fuel pump on the second series Chevrolet Matiz. First, access the rear of the vehicle and start by…
What is the fuse diagram for the Chevrolet Matiz?
What is the fuse diagram for the Chevrolet Matiz?
Chevrolet Matiz (1998-2010 / MK 1) The Chevrolet Matiz shares, as evidenced in this short video posted here, the location of the fuse boxes and their diagrams with the Chevrolet Spark.…
Replacing the Fuel Filter on Chevrolet Matiz
Replacing the Fuel Filter on Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Locate the fuel filter underneath the car (if you don't know which it is, watch the video) and unscrew the long, single screw that secures it to the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos