Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel filter

Video tutorial

Locate the fuel filter underneath the car (if you don't know which it is, watch the video) and unscrew the long, single screw that secures it to the vehicle. Disconnect the lines (fuel will come out, so be careful not to get dirty) and the connector, and you're done.

Nothing could be easier! This is a very simple and quick operation, requiring only minimal attention. Proceed to install the new filter: connect the connector and attach the fuel line, then secure it with the screw, ensuring it doesn't move from its place.

Check that everything is functioning correctly.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on Matiz
Replacing the Fuel Filter on Matiz
Chevrolet Matiz (1998-2010 / MK 1) To replace the fuel filter on the Chevrolet Matiz, lift the car on a column lift or jack to access the filter. Locate the fuel filter as shown in the…
Replacing the Fuel Pump on the Chevrolet Matiz
Replacing the Fuel Pump on the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) This guide shows you how to remove and replace the fuel pump on the second series Chevrolet Matiz. First, access the rear of the vehicle and start by…
Replacement of the fuel filter of the Chevrolet Matiz
Replacement of the fuel filter of the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) To replace the fuel filter of the Chevrolet Matiz, we lift the car and place safety stands under the chassis. We find the filter under the body at th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos