Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : Replacing the fuel filter on Matiz

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Petrol filter
Operation: Replacing the fuel filter on Matiz

Replacing the fuel filter on Chevrolet Matiz, let's see how it is replaced. We lift the car on a pillar or jack bridge to get to the filter. We identify the fuel filter as in the video. With a socket wrench or screwdriver unscrew the tightening screws of the round plate placed around the filter (disconnect the cables and the various tubes from the filter) and remove it from the underbody. Once the filter has been disassembled, let's remove it from the car and disconnect the pipes (let's replace it with a new filter). Finally we reassemble the fuel filter, connect the pipes and cables and tighten the screws. We bring the car to the ground.


Posted on 1 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Matiz 1998-2010 - How much does a Chevrolet Matiz 800 petrol filter cost? Read Answer
    • Matiz 1998-2010 - Where is the Chevrolet Matiz 800 petrol filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos