Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Chevrolet Sonic

Model: Chevrolet Sonic T300 - Years 2012-2020
Part: Service warning light

To reset the service light on a Chevrolet Sonic, turn on the ignition and the engine. Using the lever that controls the turn signals, rotate the wheel with the arrow symbols down until the display shows "oil life". Press the "set/clr" button on the left end of the turn signal lever until a screen appears with two options. Rotate the wheel up until the "yes" option is selected, then press the "set/clr" button again on the left side of the turn signal lever. Once pressed, you will see "oil life 100%" on the screen, indicating the service has been reset.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2015 Chevrolet Sonic
How to Reset the Oil Light on a 2015 Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) If the oil light appears on the mini display of your 2015 Chevrolet Sonic's instrument cluster even after you have recently changed the oil, don't wo…
How to Replace the Battery in a Chevrolet Sonic?
How to Replace the Battery in a Chevrolet Sonic?
Chevrolet Sonic (2012-2020 / T300) To replace the battery in a Chevrolet Sonic, open the hood to access the components inside the engine compartment. The battery is located near the le…
How to Replace the Headlight Bulb on a Chevrolet Sonic
How to Replace the Headlight Bulb on a Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) The procedure to correctly replace the headlight bulb on your Chevrolet Sonic is fortunately very simple. With the following guide, you can complete …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos