Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Tahoe
    4. : How to program a new remote in the Chevrolet Tahoe?

Chevrolet Tahoe - Video tutorial

Model: Chevrolet Tahoe Gmt800 - Years 2000-2006
Part: Key
Operation: How to program a new remote in the Chevrolet Tahoe?

In this tutorial, we can see how to program a new remote control in the Chevrolet Tahoe, a very simple and quick operation. To do this, we will need a working key, otherwise it will not be possible to proceed. First of all, go inside the car, then insert the key, hold down the door unlock button, and at the same time, turn the ignition on and off twice in a row. Once this is done, release the button, hold down the unlock and lock buttons on the new remote control, and wait for the procedure to finish.


Posted on 27 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos