Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Light Bulbs with LED Lamps

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Tail light bulb

To replace the rear light bulb, you need to remove the entire light assembly. The screws are accessible on the side of the pillar next to the light. After removing the screws with a screwdriver, take off the light cover to access the bulbs. Carefully replace the bulbs by pressing them slightly and turning counterclockwise until they release. Insert the new LED bulbs into the bulb holder. Test the operation by turning on the position indicator. Position the cover back in the housing and carefully tighten the screws.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlight Bulbs on a Chevrolet Matiz
Replacing the Rear Headlight Bulbs on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Today, in this tutorial, you will learn how to remove and replace the bulbs of the rear headlight on a Chevrolet Matiz. Start by opening the boot and…
Replacing the Rear Light on a Chevrolet Matiz
Replacing the Rear Light on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this simple video tutorial, you will learn how to remove and replace the rear light on a Chevrolet Matiz: the procedure is quick and does not requ…
How to Change the Headlight Bulbs on a Chevrolet Matiz
How to Change the Headlight Bulbs on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Learn how to replace the headlight bulbs on a Chevrolet Matiz. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos