Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Matiz
  6. : How to replace the stop light on Matiz

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Tail light
Operation: How to replace the stop light on Matiz

Replacing the rear light on a Chevrolet Matiz? We open the hatch and remove the headlight. Unscrew the tightening screws on the side of the rear light with a screwdriver. We detach the rear light from its housing once all the screws have been removed (remove the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). As soon as we have finished assembling the bulbs, we go to mount the lighthouse with attached screws and reconnect the power supply terminals. We test the correct functioning of the mounted bulbs. We mount the same lighthouse or a new one.


Posted on 18 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos