Do it yourself
| ||||
|
Chrysler 300c - Shock absorbers
Chrysler 300c (2004-2011 / MK 1)
How to install the rear shock absorbers. First of all, let's start by saying which only the tools you will need: A 15mm socket and a 17mm socket, an 18mm wrench, a 21mm wrench. Now let's get started. …read all… Posted on 25 July 2023 by ScegliAuto
Chrysler 300c (2004-2011 / MK 1)
Replacement of front shock absorbers Raise the car on the bridge. Unscrew the bolts and remove the wheel. Unscrew and extract the arm retaining pins from the suspension with a size 16 wrench and …read all… Posted on 19 July 2023 by ScegliAuto Airbags (1) Shock absorbers (2) Car stereo (1) Key (3) Checks and maintenance (3) Dashboard (1) Headlight (1) Fog lights (1) Oil filter (1) Accessory Kit (1) Light bulb (1) Interior lights ceiling light bulb (1) Starter motor (2) Front bumper (1) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (5) Lock (1) Suspensions (1) Outside rearview mirror (1) EGR valve (1) |
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |