Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. :
  3. Chrysler 200
    4. : Front bumper

Chrysler 200 - Front bumper

Front Bumper Chrysler 200 (2011-2014 / mk 1)

Chrysler 200 (2011-2014 / MK 1)
How to Replace the Front Bumper on a Chrysler 200?
To replace the front bumper on a Chrysler 200, loosen the screws and detach the fastening rivets located inside the front wheel wells. After removing these …Read all…
Posted on 9 August 2026 by ScegliAuto
Shocks (1) Car stereo (1) Battery (3) Key (4) A/C controls (1) Headlight (1) Air filter (2) Cabin air filter (5) Headlight bulb (3) License plate light (1) Front bumper (1) Fuel pump (1) Fuse box (3) Warning light – error code (1) Service warning light (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos