Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Chrysler 200?

Model: Chrysler 200 MK 1 - Years: 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

To replace the front bumper on a Chrysler 200, loosen the screws and detach the fastening rivets located inside the front wheel wells. After removing these fasteners, open the hood and loosen the screws at the top of the corresponding bumper.

This will allow you to first detach the front grille and then the entire bumper. Once the old bumper is removed, position the new one, securing it with the appropriate screws and rivets.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) To replace the air filter - or pollen filter - on the Chrysler 200, locate it behind the glove compartment, which needs to be emptied and partially d…
Replacing the Headlight Bulb on the Chrysler 200
Replacing the Headlight Bulb on the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Let's look at this guide for step-by-step instructions to remove and replace the headlight bulb on the Chrysler 200. To access the bulb, you need to …
How to Replace the Brake Light Switch on a Chrysler 200
How to Replace the Brake Light Switch on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) In this guide, follow the main instructions to remove and replace the brake light switch on a Chrysler 200. First, get inside the vehicle on the driv…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos