Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the Chrysler 200

Model: Chrysler 200 MK 1 - Years: 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Let's look at this guide for step-by-step instructions to remove and replace the headlight bulb on the Chrysler 200. To access the bulb, you need to remove the front wheel well, then take off the plastic cap located behind the headlamp; after that, disconnect the electrical connector from the bulb, removing it from the socket, as shown in the video.

At this point, install the new bulb, which has the same base; all that's left is to reassemble the bulb into the headlight assembly, applying the reverse procedure of disassembly!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Replacement of the front headlight bulb of the Chrysler 200
Replacement of the front headlight bulb of the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Today we will discover the steps that will allow us to uncover the process of disassembling and replacing the headlight bulb of the Chrysler 200. To …
How to Replace the Low Beam Bulb on the Chrysler 200
How to Replace the Low Beam Bulb on the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) To replace the low beam bulb on the Chrysler 200, start by removing the inner fender liner. Unscrew the 3 screws attached to the bumper and remove th…
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos