Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Chrysler 200

Model: Chrysler 200 MK 1 - Years 2011-2014
Part: Headlight bulb

Today we will discover the steps that will allow us to uncover the process of disassembling and replacing the headlight bulb of the Chrysler 200. To access the low beam bulb, it will be necessary to remove the front wheel arch, unscrewing the fixing screws and removing the various clips; then we remove the plastic protective cap and disconnect the electrical connector of the low beam bulb, as shown in the video. At this point we install the new low beam bulb, of the correct type and having the same attachment; we reassemble the cap and finally the wheel arch!

Posted on 6 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Chrysler 200
Replacing the Headlight Bulb on the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Let's look at this guide for step-by-step instructions to remove and replace the headlight bulb on the Chrysler 200. To access the bulb, you need to …
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Cabin Filter in a Chrysler 200?
How to Replace the Cabin Filter in a Chrysler 200?
Chrysler 200 (2015-2017 / MK 2) To replace the cabin filter in a Chrysler 200, remove the plastic panel on the left side of the footwell on the passenger side. Once this panel is re…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos