Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on a Chrysler 200

Model: Chrysler 200 MK 1 - Years: 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

Today, let's go through the main steps to remove and replace the headlights on a Chrysler 200, following the instructions below. First, open the hood and start by removing the mounting screws located at the top of the bumper, also removing the lower ones; then remove the additional screws found on both sides of the front wheel wells, as shown in the video.

Now, detach the bumper from the sides until it is completely removed; then remove the screws from the headlight and disconnect the electrical connector to take out the headlamp assembly!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the Chrysler 200
Replacing the Headlight Bulb on the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Let's look at this guide for step-by-step instructions to remove and replace the headlight bulb on the Chrysler 200. To access the bulb, you need to …
How to Replace the Front Bumper on a Chrysler 200?
How to Replace the Front Bumper on a Chrysler 200?
Chrysler 200 (2011-2014 / MK 1) To replace the front bumper on a Chrysler 200, loosen the screws and detach the fastening rivets located inside the front wheel wells. After removing…
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos