Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Light of the Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

Here are the instructions to remove and replace the front light of the Chrysler Voyager. First, open the bonnet of the vehicle and start unscrewing the fixing screws located at the top of the headlamp unit; then detach it from the bodywork, subsequently removing all the bulb holders along with the bulbs, as shown in the video.

At this point, install the new front headlamp unit, then reassemble the bulbs inside it; securely fix the light to the bodywork, applying the reverse procedure for reassembly!


Updated on 29 August 2026 by ScegliAuto


Related tutorials

Remove the Front Headlamp of a Chrysler Voyager
Remove the Front Headlamp of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Want to remove the front headlamp of a Chrysler Voyager? Follow these steps: open the bonnet by pulling the release lever and secure it. Unscrew the …
How to Replace the External Wing Mirror of the Chrysler Voyager?
How to Replace the External Wing Mirror of the Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) To replace the wing mirror of the Chrysler Voyager, use a thin object to pry off the outer cover that surrounds the base of the mirror. Once this is …
How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos