Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Headlamp of a Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years 2000-2007
Part: Headlight

Want to remove the front headlamp of a Chrysler Voyager? Follow these steps: open the bonnet by pulling the release lever and secure it. Unscrew the retaining bolts on the headlamp bar using a socket or battery-powered screwdriver, disconnect the bulb holder from the headlamp, and extract the headlamp from the vehicle body. Fit the new headlamp with new bulbs if damaged (ensure they are the correct type and size) and insert the headlamp into its housing. Finally, tighten the bolts on the headlamp with the plastic strap. Test the lights to ensure they are functioning correctly.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on a Chrysler Voyager
How to Replace the Headlight Bulbs on a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Want to replace the damaged headlight bulbs on a Chrysler Voyager? Follow these steps for disassembly: open the bonnet by pulling the release lever a…
Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuses of the Chrysler Voyager are contained inside the appropriate fuse box that is installed on the vehicle: in this car model, only one box can…
How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos