Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Chrysler Voyager remote control

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Key

The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed with the replacement. Press the side button of the remote control to remove the top part and extract the emergency metal key contained inside the remote control. Insert a flathead screwdriver into the remote control hole to pry it open in two parts. Replace the battery and close the remote control. After inserting the key inside, test the remote control by opening the vehicle.

Posted on 19 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Chrysler Voyager remote control (2017-2025)
How to replace the battery of the Chrysler Voyager remote control (2017-2025)
Chrysler Voyager (2020-2026 / MK 6) Replacing the battery of a Chrysler Voyager car key produced from 2017 to 2025 independently is a simple and quick operation that can be done in less…
How to replace the battery of the Chrysler Voyager remote control DIY.
How to replace the battery of the Chrysler Voyager remote control DIY.
Chrysler Voyager (2020-2026 / MK 6) On the Chrysler Voyager remote control, the battery replacement is carried out as shown in the video. The mechanical blade (if present) is detached t…
How to Replace the Key Battery on the Chrysler Grand Voyager?
How to Replace the Key Battery on the Chrysler Grand Voyager?
Chrysler Voyager (2020-2026 / MK 6) If you intend to replace the button battery inside the smart key of the new Chrysler Grand Voyager, this guide will clarify the steps to take. The fi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos