Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on the Chrysler Grand Voyager?

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Key

If you intend to replace the button battery inside the smart key of the new Chrysler Grand Voyager, this guide will clarify the steps to take. The first step is to fully slide out the emergency key contained within the cover. Next, use a flat screwdriver to open the cover and access the exhausted battery. Finally, replace it with a new model and correctly reassemble the cover. Don't forget to reposition the physical emergency key inside, and you have completed the operation.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…
How to replace the battery of the Chrysler Voyager remote control (2017-2025)
How to replace the battery of the Chrysler Voyager remote control (2017-2025)
Chrysler Voyager (2020-2026 / MK 6) Replacing the battery of a Chrysler Voyager car key produced from 2017 to 2025 independently is a simple and quick operation that can be done in less…
Where is the fuse box of the Chrysler Voyager located?
Where is the fuse box of the Chrysler Voyager located?
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager that will be released in 2025 will have a large fuse box installed inside the front hood. The box will be located near the batte…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos