Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Bulb on the Chrysler 200

Model: Chrysler 200 MK 1 - Years 2011-2014
Part: Headlight bulb

To replace the low beam bulb on the Chrysler 200, start by removing the inner fender liner. Unscrew the 3 screws attached to the bumper and remove the 5 plastic clips using a flathead screwdriver. After removing the inner fender liner, locate the back of the headlight. Turn the headlight cover counterclockwise until you hear a click, disconnect the connector, and remove the bulb. With the old bulb removed, take the new bulb out of the package and install it in the same way as the old one. After positioning the new bulb, reconnect the connector, screw the headlight cover back on, and reinstall the inner fender liner by putting back the 5 clips and screwing in the 3 screws attached to the bumper.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Chrysler 200
Replacement of the front headlight bulb of the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Today we will discover the steps that will allow us to uncover the process of disassembling and replacing the headlight bulb of the Chrysler 200. To …
Replacing the Headlight Bulb on the Chrysler 200
Replacing the Headlight Bulb on the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Let's look at this guide for step-by-step instructions to remove and replace the headlight bulb on the Chrysler 200. To access the bulb, you need to …
How to replace the license plate light of the Chrysler 200
How to replace the license plate light of the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If you own a second-generation Chrysler 200 and are experiencing issues with the license plate light, don't worry because thanks to the procedure des…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos