Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Chrysler 200

Model: Chrysler 200 MK 2 - Years 2015-2017
Part: License plate light

If you own a second-generation Chrysler 200 and are experiencing issues with the license plate light, don't worry because thanks to the procedure described in our new guide, you will be able to replace it yourself. First, make sure the car is completely turned off, then go to the rear of the vehicle and lift the hood. At this point, locate the license plate light and remove it with the help of a small crosshead screwdriver. Finally, replace the faulty bulb with a new one that is perfectly compatible.

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery in the Chrysler 200
How to Change the Battery in the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If you need to replace the battery in this vehicle, follow the simple instructions provided here and refer to the images in the video tutorial. After…
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Brake Light Switch on a Chrysler 200
How to Replace the Brake Light Switch on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) In this guide, follow the main instructions to remove and replace the brake light switch on a Chrysler 200. First, get inside the vehicle on the driv…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos