Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Switch on a Chrysler 200

Model: Chrysler 200 MK 1 - Years 2011-2014

In this guide, follow the main instructions to remove and replace the brake light switch on a Chrysler 200. First, get inside the vehicle on the driver's side and lower yourself to reach behind the pedal assembly; then disconnect the brake pedal switch by unplugging its electrical connector to remove it, as shown in the video. At this point, install the new brake light switch using the original replacement part; check its operation and finally reassemble the switch!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Key Battery in a Chrysler 200
How to Replace the Key Battery in a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If the smart key for your Chrysler 200 suddenly stops working, don't rush to buy a new one. The issue may simply be due to a dead battery. Let's see …
Replacing the Headlight Bulb on the Chrysler 200
Replacing the Headlight Bulb on the Chrysler 200
Chrysler 200 (2011-2014 / MK 1) Let's look at this guide for step-by-step instructions to remove and replace the headlight bulb on the Chrysler 200. To access the bulb, you need to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos