Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chrysler 200

Model: Chrysler 200 MK 1 - Years: 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the battery in a Chrysler 200. The first step is to get inside the vehicle and engage the parking brake. Step two is to open the hood and secure it with the prop rod. Step three is to remove the battery cover and then disconnect the battery terminals, starting with the negative terminal to avoid generating dangerous sparks in the vehicle's electrical system.

Next, disconnect the positive terminal as well. Once both terminals are removed and away from the battery, use a 10 mm wrench to remove the bolt that secures the battery in the engine compartment.

Remove the battery from its location and replace it with the new one.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Chrysler 200 key.
How to replace the battery of the Chrysler 200 key.
Chrysler 200 (2011-2014 / MK 1) In the following guide, we will explain how you can replace the battery in the key of your first edition Chrysler 200 on your own. First of all, make…
How to Replace the Key Battery in a Chrysler 200
How to Replace the Key Battery in a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If the smart key for your Chrysler 200 suddenly stops working, don't rush to buy a new one. The issue may simply be due to a dead battery. Let's see …
How to Replace the Key Fob Battery for the Chrysler 200
How to Replace the Key Fob Battery for the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) In today's video, you will see how to replace the dead battery in the key fob for the Chrysler 200. This tutorial also applies to other contemporary …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos