Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in the Chrysler 200

Model: Chrysler 200 MK 2 - Years 2015-2017
Part: Battery

If you need to replace the battery in this vehicle, follow the simple instructions provided here and refer to the images in the video tutorial. After opening the hood, locate the battery on the right side behind the headlight. Disconnect the negative terminal first, then the positive terminal. Remove the bolt securing the battery tray and take off the plastic cover. Pull the battery out of its housing and position the new one in place. Reinstall the bolt for the battery tray and then reconnect the positive terminal followed by the negative terminal.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Chrysler 200?
How to Replace the Battery in a Chrysler 200?
Chrysler 200 (2011-2014 / MK 1) To replace the battery in a Chrysler 200, lift the car to access the bolts securing the left front wheel to the hub. Once the wheel is removed, you c…
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Key Battery in a Chrysler 200
How to Replace the Key Battery in a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) If the smart key for your Chrysler 200 suddenly stops working, don't rush to buy a new one. The issue may simply be due to a dead battery. Let's see …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos