Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Engine Mount

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Engine

The failure of the engine mount is a common defect due to the continuous stresses it undergoes, and once the rubber breaks, the noise becomes quite annoying; replacing this mount is very simple: lift the vehicle and place it on suitable axle stands, use a jack to support the engine during the removal of the mount and unscrew the bolts that secure the mount to the engine and the vehicle chassis; once the complete mount with the attachment bracket is removed, detach this bracket to fit it onto the new mount and proceed in reverse for installation.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Front Shock Absorber Replacement
Chrysler Pt Cruiser (2000-2010 / MK 1) Position the vehicle on a lift. Before raising it, disconnect the top mounts from the control unit. Remove the front wheels, the brake line clips, an…
Replacing the Timing Belt
Replacing the Timing Belt
Chrysler Pt Cruiser (2000-2010 / MK 1) Replacing the timing belt is not typical DIY maintenance as an installation error could severely damage the engine; however, if you wish to attempt t…
Instructions for Removing Front Bumper
Instructions for Removing Front Bumper
Chrysler Pt Cruiser (2000-2010 / MK 1) Removing the front bumper is extremely simple: it involves unscrewing the relevant fixing screws; start by opening the bonnet to unscrew the front fi…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos