Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. :
  3. Pt Cruiser
    4. : Replacement of front shock absorbers

Chrysler Pt Cruiser - Video tutorial

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Shock absorbers
Operation: Replacement of front shock absorbers

Place the car on a lift but before lifting it, release the domes from the control unit. Then remove the front wheels, the cable guides of the brake pipes and the bolts fixing the shock absorber to the hub support. Then remove the nut fixing the shock absorber rod to the bodywork dome. Then use the special clamps to compact the spring and be able to disassemble the support to be applied to the new shock absorber (consider replacing the support if necessary). Once the assembly of the new shock absorber with spring and support has been completed, install it in the car by proceeding in reverse order.


Posted on 29 July 2023 by ScegliAuto

This video is currently unavailable


Rear shock absorber replacement
Chrysler Pt Cruiser (2000-2010 / MK 1) Raise the car on a lift and remove the rear wheel; disassemble the shock absorber fixing pins, remove it from its seat and apply the new one taking c
Replacement discs and front pads
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the front discs and pads, lift the car on a lift and remove the front wheel; then proceed with disassembling the brake caliper, remove the
Headlight replacement
Chrysler Pt Cruiser (2000-2010 / MK 1) In order to carry out this operation and to be able to access the headlight bulb holder, it is necessary to remove some parts of the bodywork and the

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos