Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Camshaft Position Sensor Replacement

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine

Video tutorial

The camshaft position sensor is located to the side of the rocker cover and is a type of plastic disc secured with two pins. First, remove the securing pins to detach it, then disconnect the corresponding connector after unlocking the clip by sliding it. Next, attach the connector to the new sensor by securing the clip, position the sensor in its housing ensuring the o-ring gasket adheres properly, and tighten the securing pins.

The proper functioning of this sensor is crucial as it provides the engine management unit with important information regarding the position of the valves.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the rocker cover gasket (the cover of the camshaft), you must first remove the intake manifold. Start by disconnecting the hose that goes …
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chrysler Pt Cruiser (2000-2010 / MK 1) Replacing the engine oil and filter is an extremely simple maintenance task: once the vehicle is raised on a lift, unscrew the drain plug from the bo…
Replacing the Timing Belt
Replacing the Timing Belt
Chrysler Pt Cruiser (2000-2010 / MK 1) Replacing the timing belt is not typical DIY maintenance as an installation error could severely damage the engine; however, if you wish to attempt t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos