Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

Video tutorial

Replacing the timing belt is not typical DIY maintenance as an installation error could severely damage the engine; however, if you wish to attempt this repair, proceed as follows: lift the vehicle on suitable car stands and remove the front right wheel and the corresponding wheel arch liner to access the pulleys; then place a jack under the engine to support it as the side mount also needs to be removed; next, remove the auxiliary belt and take off the crankshaft pulley; rotate the crankshaft to align the timing marks, loosen the tensioner, and remove the timing belt to install the new one without rotating the pulleys.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser
How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video, you will learn how to adjust the tensioner of the timing belt on the Chrysler PT Cruiser. First, ensure the engine is at room temperat…
How to Change the Timing Belt on a PT Cruiser
How to Change the Timing Belt on a PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) Learn how to change the timing belt on a PT Cruiser. Lift the car on a column lift and remove the right front wheel; remove the right wheel arch line…
How to Replace the Timing Belt on a Chrysler PT Cruiser?
How to Replace the Timing Belt on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the timing belt on a Chrysler PT Cruiser, open the bonnet to remove the plastic cover on the left side of the engine bay. Once this cover …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos