Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Chrysler PT Cruiser?

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

Video tutorial

To replace the timing belt on a Chrysler PT Cruiser, open the bonnet to remove the plastic cover on the left side of the engine bay. Once this cover is removed, loosen the bolts securing the front right wheel of the car. Then, detach the inner wheel arch cover to access the internal components.

At this point, loosen the central nut of the tensioner pulley, completely remove it, and reduce the tension on the belt, allowing it to be removed and replaced.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser
How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video, you will learn how to adjust the tensioner of the timing belt on the Chrysler PT Cruiser. First, ensure the engine is at room temperat…
How to Replace the Power Steering Belt on the Chrysler PT Cruiser?
How to Replace the Power Steering Belt on the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) Replacing the power steering belt on the Chrysler PT Cruiser may seem complicated, but it is actually quite simple. Follow these steps in this tutori…
Removing the Water Pump from a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video tutorial, you will see the main steps to remove the water pump from a Chrysler PT Cruiser. Start by removing the front right wheel and …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos