Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

Video tutorial

In this video, you will learn how to adjust the tensioner of the timing belt on the Chrysler PT Cruiser. First, ensure the engine is at room temperature.

Make sure you have all the necessary tools before starting the job. Lift the vehicle on a ramp and remove the front right wheel, the wheel arch, and any other covers to access the components that need to be removed. Drain the coolant and remove the fuel filter, the windscreen washer filler neck, and the expansion tank for the coolant.

At this point, you can access the timing belt tensioner and adjust it as needed.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Chrysler PT Cruiser?
How to Replace the Timing Belt on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the timing belt on a Chrysler PT Cruiser, open the bonnet to remove the plastic cover on the left side of the engine bay. Once this cover …
Where Are the Fuses on a Chrysler PT Cruiser?
Where Are the Fuses on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses on a Chrysler PT Cruiser are contained within the corresponding fuse boxes designed to hold them: on this type of vehicle, there will be a …
Where are the fuses located in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses of the Chrysler PT Cruiser are divided inside the appropriate fuse boxes that are installed on the vehicle: on this car model, two can be i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos