Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt on a PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Timing belt

Learn how to change the timing belt on a PT Cruiser. Lift the car on a column lift and remove the right front wheel; remove the right wheel arch liner (take out the plastic rivets). Use a spanner to loosen the tensioner pulley and slide the belt off the pulleys. Using a socket wrench, unscrew the tensioner pulley bolt, then remove the water pump as shown in the video. Fit the new water pump, tensioner, and the belt itself, tightening everything with the socket wrench. Refit the rivets along with the wheel arch liner and reassemble the wheel with the tyre on the vehicle.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser
How to Adjust the Tensioner of the Timing Belt on the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video, you will learn how to adjust the tensioner of the timing belt on the Chrysler PT Cruiser. First, ensure the engine is at room temperat…
How to Replace the Timing Belt on a Chrysler PT Cruiser?
How to Replace the Timing Belt on a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the timing belt on a Chrysler PT Cruiser, open the bonnet to remove the plastic cover on the left side of the engine bay. Once this cover …
Replacing the Timing Belt
Replacing the Timing Belt
Chrysler Pt Cruiser (2000-2010 / MK 1) Replacing the timing belt is not typical DIY maintenance as an installation error could severely damage the engine; however, if you wish to attempt t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos