Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Water Pump on Fiat, Chrysler, Dodge MultiAir Engines

Model: Chrysler Chrysler Various
Part: Pump

Video tutorial

In this video, you will see how to remove the water pump on various models of Fiat, Chrysler, and Dodge equipped with MultiAir engines. The engine is already removed from the vehicle.

Using a socket wrench, start by removing the timing belt and loosening the bolts of the pulley: loosen the tensioner to remove the belt. At this point, once the larger pulley is removed, unscrew the bolts of the water pump as shown in the video: now you can extract the water pump with some force and replace it.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Opening the Bonnet on Chrysler and Dodge
Opening the Bonnet on Chrysler and Dodge
Chrysler Chrysler Various In this video tutorial, you will learn how to open the bonnet on certain models of Chrysler and Dodge. First, pull the bonnet release lever located i…
Reset Airbag Light on Jeep, Fiat, Dodge, and Chrysler Cars
Reset Airbag Light on Jeep, Fiat, Dodge, and Chrysler Cars
Chrysler Chrysler Various In this tutorial, you will learn a method to reset the airbag light, but it is still advisable to take the car to a workshop to check for any actual …
How to Reset the ECU on Chrysler, Dodge, Jeep Cars
How to Reset the ECU on Chrysler, Dodge, Jeep Cars
Chrysler Chrysler Various Today, you will learn a simple yet clever trick to reset the car's ECU at no cost. Switch off the car, engage the handbrake, and remove the ignition …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos