Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine

Video tutorial

To replace the rocker cover gasket (the cover of the camshaft), you must first remove the intake manifold. Start by disconnecting the hose that goes from the air filter box to the throttle body, then disconnect the vacuum lines from the throttle body itself.

Next, proceed to remove the intake manifold, disconnecting the vacuum lines and hoses without removing the wiring; it is sufficient to move it aside to access the rocker cover. At this point, remove the ignition coils, spark plug leads, and pull out the rubber seals, then unscrew the fastening pins of the cover itself.

Before applying the new gasket and proceeding with reassembly, clean the gasket seating thoroughly.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Camshaft Position Sensor Replacement
Camshaft Position Sensor Replacement
Chrysler Pt Cruiser (2000-2010 / MK 1) The camshaft position sensor is located to the side of the rocker cover and is a type of plastic disc secured with two pins. First, remove the securi…
How to replace the rear hatch seal of the Chrysler PT Cruiser
How to replace the rear hatch seal of the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) Today's instructions will show us how to disassemble and replace the seal of the rear trunk door of the Chrysler PT Cruiser. First, we open the trunk…
Removal and Replacement of the Air Filter
Removal and Replacement of the Air Filter
Chrysler Pt Cruiser (2000-2010 / MK 1) This video illustrates how to remove and replace the engine air filter in our car. First, loosen the metal clamp securing the air duct to the filter …

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos