Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Air Filter

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Air filter

This video illustrates how to remove and replace the engine air filter in our car. First, loosen the metal clamp securing the air duct to the filter box manifold. Once loosened, simply remove it by detaching it from the filter box; to open the filter box cover, just unclip the various clips that secure it. Once the cover is removed, check the condition of your air filter, and if it is excessively dirty and clogged, proceed with its replacement; before installing the new filter, remember to clean its housing.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Radiator Fan
Removing and Replacing the Radiator Fan
Chrysler Pt Cruiser (2000-2010 / MK 1) This video shows how to remove and replace the radiator fan. First, remove the rubber strip where the bonnet rests, then disconnect the fan connector…
What is the fuse layout of the Chrysler PT Cruiser?
What is the fuse layout of the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) If some devices of our Chrysler PT Cruiser have suddenly stopped working, we can first of all check the status of the corresponding fuses whose schem…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Chrysler Pt Cruiser (2000-2010 / MK 1) If you want to replace the cabin air filter of a Chrysler PT Cruiser without going to a garage, this video will help you. Open the bonnet. Unscrew an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos