Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

Video tutorial

If you want to replace the cabin air filter of a Chrysler PT Cruiser without going to a garage, this video will help you. Open the bonnet. Unscrew and remove the three screws that secure the air grille near the windscreen on the passenger side.

Using a screwdriver first and then a blade, unscrew and remove the clip located beside the grille. Also, remove the rubber side cap that helps keep the grille in place; now finally lift and extract the grille.

Unscrew the bolts of the windscreen washer reservoir: you do not need to unscrew them completely, just loosen them to allow access to the filter compartment: disengage the clips of its cover and replace the old filter with a new one. Reassemble everything as before by reversing the disassembly steps.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Air Filter
Removal and Replacement of the Air Filter
Chrysler Pt Cruiser (2000-2010 / MK 1) This video illustrates how to remove and replace the engine air filter in our car. First, loosen the metal clamp securing the air duct to the filter …
Replacing the Cabin Filter on a Chrysler PT Cruiser
Replacing the Cabin Filter on a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the cabin filter on a Chrysler PT Cruiser, follow these simple steps: first, purchase a new pollen filter. Next, get inside the vehicle, t…
Localization and diagram of the fuse boxes of the Chrysler PT Cruiser.
Localization and diagram of the fuse boxes of the Chrysler PT Cruiser.
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video we can see the location and diagram of the fuse boxes of the Chrysler PT Cruiser: the fuse box in the 2001/2005 version is located in t…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos