Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Chrysler Voyager

Model: Chrysler Voyager MK 6 - Years 2020-2026
Part: Cabin air filter

Today's instructions will show us the process of disassembling and replacing the cabin air filter of the Chrysler Voyager. First, we get on board the vehicle, front passenger side, and start by opening and removing the glove compartment, releasing the two side rods; then we remove the pollen filter cover found on the back, as shown in the video. At this point, we remove the old cabin air filter cartridge and replace it with the new one, inserting it in the correct direction; finally, we reassemble the glove compartment!

Posted on 24 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter of a Chrysler Voyager
How to Replace the Cabin Air Filter of a Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) Before you can start, open the front passenger door of your Chrysler Voyager. The cabin air filter is located beneath the glove compartment. First, u…
How to replace the battery of the Chrysler Voyager remote control
How to replace the battery of the Chrysler Voyager remote control
Chrysler Voyager (2020-2026 / MK 6) The Chrysler Voyager's remote control stopped working due to the battery not functioning, so it is necessary to open the remote control and proceed w…
Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuses of the Chrysler Voyager are contained inside the appropriate fuse box that is installed on the vehicle: in this car model, only one box can…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos