Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Chrysler 200.

Model: Chrysler 200 MK 2 - Years: 2015, 2016, 2017
Part: Air filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the air filter on a Chrysler 200 by following a few simple steps: the first thing to do is to purchase a new air filter from an authorized dealer; next, get inside the vehicle, turn off the car, and pull the handbrake.

Raise the hood and secure it with the prop rod; once you locate the filter box in the engine compartment, loosen the clamp on the intake tube and then unscrew the bolts holding the cover of the filter box; after this operation, lift the filter cover and disconnect it from the intake tube.

Remove the old filter and clean the filter housing with an air compressor. Position the new filter and reassemble all parts in reverse order.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) If you want to replace the cabin air filter in your 2014 Chrysler 200 yourself, follow the steps in this guide. First, park your Chrysler 200 safely …
How to Replace the Cabin Air Filter on a Chrysler 200
How to Replace the Cabin Air Filter on a Chrysler 200
Chrysler 200 (2015-2017 / MK 2) To replace the air filter - or pollen filter - on the Chrysler 200, locate it behind the glove compartment, which needs to be emptied and partially d…
How to Replace the Cabin Air Filter of the Chrysler 200
How to Replace the Cabin Air Filter of the Chrysler 200
Chrysler 200 (2015-2017 / MK 2) Here’s how to easily replace the cabin air filter of the Chrysler 200: access it from the glove compartment, which can be easily removed by pressing …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos